Preparing the surface :
• Make sure the wood is clean, dry and free of dust.
• Remove old coats of paint, varnish or oil if necessary.
• Lightly sand the surface to facilitate penetration of the product.
Application :
• Stir the product well before use.
• Apply an even coat using a brush, roller or spray gun.
• Be sure to saturate exposed areas, such as wood ends or cracks.
Drying time :
• Leave to dry for 12 to 24 hours depending on temperature and humidity.
• If necessary, apply a second coat for extra protection.
Cleaning :
• Clean tools immediately after use with a suitable solvent, such as cleaners naphta.
Precautions for use :
• Use in a well-ventilated area or outdoors.
• Wear gloves, goggles and a mask to avoid contact with skin or eyes.
• Keep the product out of the reach of children and away from sources of heat or sparks.
Storage :
• Close container tightly after use.
• Store in a cool, dry place away from frost and direct sunlight.
Advice :
• Test on a small area before full application to check compatibility with treated wood.
Do not apply in damp weather or direct sunlight to ensure good absorption and optimum drying.
